Home Products Timber Info Activities Lettings About Contact

Click to choose profile family.

overlapped boards
overlapped
boards
board-on-board cladding
board-on-board
lapped cladding
lapped
open joint cladding
open
joint
T&G cladding
tongue
& groove

Design Your Profile: Overlapping Boards

The "cover" is the distance from the bottom edge of one board to the bottom edge of the next, i.e. the repeat. It can be worth drawing lines this distance apart onto elevation drawings of your building to see what looks best. Minimum recommended thickness is 18mm, or 16 for boards under 100mm wide.



Select Finish: